Lift the window switch fully
upward to the second
detent, release, and the window will go up automatically.
To stop the window from going all the way up during the
"Auto Up" operation, push down on the
switch
briefly.
To close the window part way, lift the window
switch
to the first detent and release when you want the
window to stop.
NOTE: If the window runs into any obstacle during "Auto Up," it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window. Any impact due to rough road conditions may trigger the auto reverse function unexpectedly during "Auto-Up." If this happens, pull the switch lightly to the first detent and hold it to close the window manually.
WARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. |