Toyota
Dodge Durango
 Service Manual
Body » Seats » Removal and installation
3Rd row seat back cover

NOTE: THE CLOTH TRIM IS BONDED TO THE BACK FOAM.

REMOVAL

(1) Remove 3rd row seat back.

(2) Remove head restraints, and head restraint sleeves and guides. Discard sleeves and guides.

(3) Disengage J-straps on each side of seat back (Fig. 16).

(4) Disengage J-strap at base of seat back.

(5) Lift the back of the cover upward and slide seat back frame out of cover.

Fig. 16 3rd Row Seat Back Cover J-Strap Fig. 16 3rd Row Seat Back Cover J-Strap

1 - 3RD ROW SEAT BACK

2 - J-STRAP

INSTALLATION

(1) Slide seat back frame into cover.

(2) Engage J-straps on each side of seat back.

(3) Engage J-strap at base of seat back.

(4) Install new head restraint sleeves and guides.

Install head restraints.

(5) Install 3rd row seat back.

    More about «Removal and installation»:

    Side shield

    Towel bar

    Bucket seat track

    Bucket seat back cover/cushion

    Bucket seat cushion/cover

    Center seat/console

    Center armrest/console inertia latch cover

    Center seat cushion/cover

    2Nd row seat back

    2Nd row seat back cover

    2Nd row seat cushion cover

    2Nd row seat cushion

    2Nd row seat latches

    2Nd row center seat cushion cover

    2Nd row center seat cushion

    2Nd row center seat back

    2Nd row center seat back cover

    3Rd row seat cushion cover

    3Rd row seat cushion frame

    Head restraint sleeve

    3Rd row seat back

    3Rd row seat back cover

    Dodge Durango Service Manual / Body / Seats / Removal and installation / 3Rd row seat back cover

    Dodge Durango Service Manual

    Categories


    © 2017-2023 Copyright www.dodurango.net
    0.0237