Toyota
Dodge Durango
 Service Manual
Brakes » Base brake system » Removal and installation
Wheel cylinder

REMOVAL

(1) Remove wheel and tire assembly.

(2) Remove brake drum.

(3) Disconnect wheel cylinder brake line.

(4) Remove brake shoe return springs and move shoes out of engagement with cylinder push rods.

(5) Remove cylinder attaching bolts and remove cylinder from support plate.

INSTALLATION

(1) Apply bead of silicone sealer around cylinder mounting surface of support plate.

(2) Install cylinder mounting bolts and tighten to 20 N*m (15 ft. lbs.).

(3) Connect brake line to cylinder.

(4) Install brake shoe return spring.

(5) Install brake drum.

(6) Install wheel and tire assembly.

(7) Bleed base brake system.

    More about «Removal and installation»:

    Brake lamp switch

    Brake pedal

    Combination valve

    Master cylinder

    Power brake booster

    Disc brake caliper

    Disc brake shoes

    Disc brake rotor

    Rear brake shoes

    Wheel cylinder

    Brake support plate

    Front park brake cable

    Rear park brake cables

    Park brake pedal assembly

    Dodge Durango Service Manual / Brakes / Base brake system / Removal and installation / Wheel cylinder

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.005