Turn signal system. Hazard warning system
DESCRIPTION A turn signal system is standard factory-installed
safety equipment on this model. The turn signal system
uses ignition switched battery current, and will
operate only when the ignition switch is in the On or
Accessory positions. The turn signal system includes
the following components: Refer to Lamp in the proper section of Group 8L -
Lamps for more information on the exterior turn signal
lamps. Refer to Instrument Cluster in the
proper section of Group 8E - Instrument Panel Systems
for more information on the turn signal indicator
lamps. Following are general descriptions of the
major components in the turn signal system. For
complete circuit diagrams, refer to Turn Signals in
the Contents of Group 8W - Wiring Diagrams. OPERATION With the ignition switch in the On or Accessory
position, and the turn signal (multi-function) switch
control stalk moved up (right turn) or down (left
turn), the turn signal system is activated. When the
turn signal system is activated, the circuitry of the
turn signal switch and the combination flasher will
cause the selected (right or left) turn signal indicator
lamp, front park/turn signal lamp, and rear tail/stop/
turn signal lamp to flash on and off in unison. See the owner's manual in the vehicle glove box for
more information on the features, use and operation
of the turn signal system. DESCRIPTION A hazard warning system is standard factory-installed
safety equipment on this model. Unlike the
turn signal system, the hazard warning system uses
a non-switched source of battery current so that the
system will operate regardless of the ignition switch
position. The hazard warning system includes the following
components: Refer to Lamp in the proper section of Group 8L -
Lamps for more information on the exterior turn signal
lamps. Refer to Instrument Cluster in the
proper section of Group 8E - Instrument Panel Systems
for more information on the turn signal indicator
lamps. Following are general descriptions of the
major components in the hazard warning system. For
complete circuit diagrams, refer to Turn Signals in
the Contents of Group 8W - Wiring Diagrams. OPERATION With the hazard warning switch in the On position,
the hazard warning system is activated. When
the hazard warning system is activated, the circuitry
of the hazard warning switch and the combination
flasher will cause both the right side and the left side
turn signal indicator lamps, front park/turn signal lamps, and rear
tail/stop/turn signal lamps to flash
on and off in unison.
See the owner's manual in the vehicle glove box for
more information on the features, use and operation
of the hazard warning system.Turn signal system
Hazard warning system
Dodge Durango (DN) 1998-2003 Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
