Toyota
Dodge Durango
 Owners Manual
Maintaining your vehicle » Maintenance procedures
Transfer Case

Fluid Level Check

For normal service, periodic fluid level checks are not required. When the vehicle is serviced for other reasons the exterior surfaces of the transfer case assembly should be inspected. If oil leakage is suspected inspect the fluid level. Refer to "Fluids, Lubricants, and Genuine Parts" in "Maintaining Your Vehicle" for further information.

Adding Fluid

Add fluid at the filler hole, until it runs out of the hole, when the vehicle is in a level position.

Drain

First remove fill plug, then remove drain plug. Recommended tightening torque for drain and fill plugs is 15 to 25 ft lbs (20 to 34 N·m).

CAUTION! When installing plugs, do not overtighten. You could damage them and cause them to leak.

Selection Of Lubricant

Use only the manufacturer's recommended fluid. Refer to "Fluids, Lubricants, and Genuine Parts" in "Maintaining Your Vehicle" for further information.

    More about «Maintenance procedures»:

    Engine Oil

    Engine Oil Filter

    Engine Air Cleaner Filter

    Maintenance-Free Battery

    Air Conditioner Maintenance

    Body Lubrication

    Windshield Wiper Blades

    Adding Washer Fluid

    Exhaust System

    Cooling System

    Brake System

    Front/Rear Axle Fluid

    Transfer Case

    Automatic Transmission

    Appearance Care And Protection From Corrosion

    Dodge Durango Owners Manual / Maintaining your vehicle / Maintenance procedures / Transfer Case

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0046