Toyota
Dodge Durango
 Owners Manual
Starting and operating » Trailer towing
Trailer Hitch Receiver Cover Removal - If Equipped

Your vehicle may be equipped with a trailer hitch receiver cover, this must be removed to access the trailer hitch receiver (if equipped). This cover is located at the bottom center of the rear fascia.

  1.  Turn the two locking retainers located at the bottom of the hitch receiver cover a 1/4 turn counterclockwise and pull bottom of the hitch receiver cover outward (towards you).

Hitch Receiver Cover Retainers Hitch Receiver Cover Retainers

1 - Hitch Receiver Cover 2 - Locking Retainers

  1. Pull the bottom of the cover outward (towards you) then downwards to disengage the tabs located at the top of the hitch receiver cover to remove.

Hitch Receiver Cover Hitch Receiver Cover

To reinstall the cover after towing repeat the procedure in reverse order.

NOTE: Be sure to engage all tabs of the hitch receiver cover in the bumper fascia prior to installation.

    More about «Trailer towing»:

    Common Towing Definitions

    Trailer Hitch Classification

    Trailer Towing Weights (Maximum Trailer Weight Ratings)

    Trailer Hitch Receiver Cover Removal - If Equipped

    Trailer And Tongue Weight

    Towing Requirements

    Towing Tips

    Dodge Durango Owners Manual / Starting and operating / Trailer towing / Trailer Hitch Receiver Cover Removal - If Equipped

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0026