Toyota
Dodge Durango
 Owners Manual
Starting and operating » Starting procedures » Normal Starting
To Turn Off The Engine Using ENGINE START/STOP Button

  1. Place the gear selector in PARK, then push and release the ENGINE START/STOP button.
  2.  The ignition switch will return to the OFF position.
  3.  If the gear selector is not in PARK, the ENGINE START/STOP button must be held for two seconds or three short pushes in a row with the vehicle speed above 5 mph (8 km/h) before the engine will shut off.The ignition switch position will remain in the ACC position until the gear selector is in PARK and the button is pushed twice to the OFF position. If the gear selector is not in PARK and the ENGINE START/ STOP button is pushed once, the DID will display a "Vehicle Not In Park" message and the engine will remain running. Never leave a vehicle out of the PARK position, or it could roll.
  4. If the gear selector is in Neutral, push and release the ENGINE START/STOP button with the vehicle speed below 5 mph (8 km/h) before the engine will shut off.The ignition switch position will remain in the ACC position.

NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the OFF position.

    More about «Normal Starting»:

    To Turn On The Engine Using The ENGINE START/STOP Button

    To Turn Off The Engine Using ENGINE START/STOP Button

    ENGINE START/STOP Button Functions - With Driver's Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position)

    Dodge Durango Owners Manual / Starting and operating / Starting procedures / Normal Starting / To Turn Off The Engine Using ENGINE START/STOP Button

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0038