Toyota
Dodge Durango
 Owners Manual
Understanding the features of your vehicle » Electronic speed control - if equipped
To Set A Desired Speed

Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, push the SET (+) or SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. Once a speed has been set a message CRUISE CONTROL SET TO MPH (km/h) will appear indicating what speed was set. A CRUISE indicator lamp, along with set speed will also appear and stay on in the instrument cluster when the speed is set.

To Deactivate

A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate the Electronic Speed Control without erasing the set speed from memory.

Pushing the ON/OFF button or turning the ignition switch OFF erases the set speed from memory.

To Resume Speed

To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h).

    More about «Electronic speed control - if equipped»:

    To Activate

    To Set A Desired Speed

    To Vary The Speed Setting

    To Accelerate For Passing

    Dodge Durango Owners Manual / Understanding the features of your vehicle / Electronic speed control - if equipped / To Set A Desired Speed

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0025