Toyota
Dodge Durango
 Owners Manual
Understanding the features of your vehicle » Adaptive cruise control (acc) - if equipped
To Set A Desired ACC Speed

When the vehicle reaches the speed desired, push the SET + button or the SET - button and release. The DID will display the set speed.

If the system is Set when the vehicle speed is below 20 mph (32 km/h), the Set Speed shall be defaulted to 20 mph (32 km/h). If the system is Set when the vehicle speed is above 20 mph (32 km/h), the Set Speed shall be the current speed of the vehicle.

NOTE: ACC cannot be set if there is a stationary vehicle in front of your vehicle in close proximity.

Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs:

  •  The message "DRIVER OVERRIDE" will display in the DID.
  •  The system will not be controlling the distance between your vehicle and the vehicle ahead. The vehicle speed will only be determined by the position of the accelerator pedal.
    More about «Adaptive cruise control (acc) - if equipped»:

    Adaptive Cruise Control (ACC) Operation

    Activating Adaptive Cruise Control (ACC)

    To Activate/Deactivate

    To Set A Desired ACC Speed

    To Cancel

    To Turn Off

    To Resume

    To Vary The Speed Setting

    Setting The Following Distance In ACC

    Overtake Aid

    ACC Operation At Stop

    Adaptive Cruise Control (ACC) Menu

    Display Warnings And Maintenance

    Precautions While Driving With ACC

    General Information

    Normal (Fixed Speed) Electronic Speed Control Mode

    Dodge Durango Owners Manual / Understanding the features of your vehicle / Adaptive cruise control (acc) - if equipped / To Set A Desired ACC Speed

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0048