Toyota
Dodge Durango
 Owners Manual
Things to know before starting your vehicle » Occupant restraint systems » Child Restraints
To Install A LATCH-Compatible Child Restraint

the selected seating position has a Switchable Automatic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below. See the section "Installing Child Restraints Using the Vehicle Seat Belt" to check what type of seat belt each seating position has.

  1.  Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages.
  2.  Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recline the seat and / or raise the head restraint to get a better fit. If the rear seat can be moved forward and rearward in the vehicle, you may wish to move it to its rear-most position to make room for the child seat. You may also move the front seat forward to allow more room for the child seat.
  3.  Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seating position.
  4. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section "Installing Child Restraints Using the Top Tether Anchorage" for directions to attach a tether anchor.
  5.  Tighten all of the straps as you push the child restraint rearward and downward into the seat. Remove slack in the straps according to the child restraint manufacturer's instructions.
  6.  Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction.
    More about «Child Restraints»:

    Infants And Child Restraints

    Older Children And Child Restraints

    Children Too Large For Booster Seats

    Lower Anchors And Tethers For CHildren (LATCH) Restraint System

    LATCH Positions For Installing Child Restraints In This Vehicle

    Locating LATCH Anchorages

    Locating Tether Anchorages

    Center Arm Rest Tether

    To Install A LATCH-Compatible Child Restraint

    How To Stow An Unused Switchable (ALR) Seat Belt

    Installing Child Restraints Using the Vehicle Seat Belt

    Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle

    Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR)

    Installing Child Restraints Using the Top Tether Anchorage

    Dodge Durango Owners Manual / Things to know before starting your vehicle / Occupant restraint systems / Child Restraints / To Install A LATCH-Compatible Child Restraint

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0046