Toyota
Dodge Durango
 Service Manual
Lamps » Lamp bulb service
Tail, brake, turn signal and back-up lamp bulb

REMOVAL

(1) Release liftgate latch and open liftgate.

(2) Remove screws attaching tail, brake, turn signal and back-up lamp to liftgate opening.

(3) Separate inner end of lamp from quarter panel.

(4) Disengage hook holding outer end of lamp to quarter panel opening.

(5) Separate lamp from quarter panel.

(6) Rotate lamp socket counterclockwise one quarter turn (Fig. 4).

(7) Pull socket from back of lamp.

(8) Pull bulb from socket (Fig. 5).

INSTALLATION

(1) Align key on bulb base to groove in socket and insert bulb into socket (Fig. 5).

(2) Insert socket into back of lamp.

(3) Rotate lamp socket clockwise one quarter turn.

(4) Engage hook to hold outer end of lamp to quarter panel opening.

(5) Place lamp in position on quarter panel.

(6) Install screws attaching lamp to liftgate opening.

Fig. 4 Tail, Brake, Turn Signal and Back-up Lamp Bulb Fig. 4 Tail, Brake, Turn Signal and Back-up Lamp Bulb

1 - TAIL, STOP AND TURN SIGNAL LAMP

2 - SOCKET

3 - BULB

Fig. 5 Pull Bulb From Socket Fig. 5 Pull Bulb From Socket

1 - SOCKET

2 - BULB

    More about «Lamp bulb service»:

    Headlamp bulb

    Fog lamp bulb

    Park and turn signal lamp bulbs

    Front side marker lamp bulb

    Center high mounted stop lamp (chmsl) bulb

    Liftgate/cargo lamp bulb

    Tail, brake, turn signal and back-up lamp bulb

    License plate lamp bulb

    Underhood lamp bulb

    Dome lamp bulb

    2Nd seat dome/reading lamp bulb

    Overhead console reading lamp bulb

    Dodge Durango Service Manual / Lamps / Lamp bulb service / Tail, brake, turn signal and back-up lamp bulb

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0132