Toyota
Dodge Durango
 Service Manual
Brakes » Base brake system » Description and operation
Stop lamp switch

DESCRIPTION

The plunger type stop lamp switch is mounted on a bracket attached to the brake pedal support.

CAUTION: The switch can only be adjusted during initial installation. If the switch is not adjusted properly a new switch must be installed.

OPERATION

The brake lamp switch is used to for the brake lamp, speed control and brake sensor circuits. The brake lamp circuit is open until the plunger is depressed. The speed control and brake sensor circuits is closed until the plunger is depressed.

    More about «Description and operation»:

    Brake system

    Service warnings & cautions

    Brake pedal

    Stop lamp switch

    Red brake warning lamp

    Power brake booster

    Master cylinder

    Combination valve

    Front disc brakes

    Drum brakes

    Parking brakes

    Brake hoses and lines

    Dodge Durango Service Manual / Brakes / Base brake system / Description and operation / Stop lamp switch

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0065