Side shield. Towel bar
REMOVAL (1) Remove screw attaching recliner handle to
seat.
(2) Remove recliner handle.
(3) Remove screws attaching side shield to seat.
(4) Disengage power seat harness connector, if
equipped.
(5) Separate side shield from seat. INSTALLATION (1) Engage power seat harness connector, if
equipped.
(2) Position side shield on seat.
(3) Install screws attaching side shield to seat.
(4) Install recliner handle. REMOVAL The towel bar is attached to the seat cushion frame
with unthreaded stud retainers (Fig. 1).
(1) From the underside of the seat, remove
unthreaded stud retainers.
(2) Squeeze ends of towel bar inward to release
from pivot studs.
(3) Separate towel bar from cushion frame. INSTALLATION (1) position towel bar on pivot studs. NOTE: To ensure positive retention, use new
unthreaded stud retainers to secure towel bar onto
pivot studs. (2) Install unthreaded stud retainers.Side shield
Towel bar
Dodge Durango (DN) 1998-2003 Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
