Toyota
Dodge Durango
 Service Manual
Power Lock Systems » Diagnosis and testing
Remote keyless entry transmitter

(1) Replace the Remote Keyless Entry (RKE) transmitter batteries. See Remote Keyless Entry Transmitter Battery Replacement in the Service Procedures section of this group. Test each of the transmitter functions. If OK, discard the faulty batteries.

If not OK, go to Step 2.

(2) Program the suspect RKE transmitter and another known good transmitter into the RKE module.

Use a DRB scan tool, as described in the proper Diagnostic Procedures manual. See Remote Keyless Entry Transmitter Programming in the Service Procedures section of this group.

(3) Test the RKE system operation with both transmitters. If both transmitters fail to operate the power lock system, use a DRB scan tool and the proper Diagnostic Procedures manual for further diagnosis of the RKE system. If the known good transmitter operates the power locks and the suspect transmitter does not, replace the faulty transmitter.

NOTE: Be certain to perform the Remote Keyless Entry Transmitter Programming procedure again following this test. This procedure will erase the access code of the test transmitter from the RKE receiver.

    More about «Diagnosis and testing»:

    Power lock system and remote keyless entry system

    Power lock switch

    Central timer module

    Power lock motor

    Remote keyless entry transmitter

    Relays

    Dodge Durango Service Manual / Power Lock Systems / Diagnosis and testing / Remote keyless entry transmitter

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0023