Toyota
Dodge Durango
 Service Manual
Body » Stationary glass » Removal and installation
Quarter window glass

REMOVAL

(1) Remove quarter panel trim.

(2) Carefully pull down headliner to access upper nuts attaching quarter window glass to pinchweld and remove nuts.

(3) Remove nuts attaching quarter window glass to pinchweld (Fig. 7).

(4) Using razor knife, cut butyl sealer between the mounting studs attaching glass to pinchweld.

(5) Push glass from opening.

Fig. 7 Quarter Window Glass Fig. 7 Quarter Window Glass

1 - QUARTER GLASS

2 - STUD

3 - NUT

INSTALLATION

The pinchweld should be cleaned of all old butyl sealer.

(1) Apply 6 mm (0.25 in.) of butyl tape around perimeter of glass assembly encapsulation track.

Ensure the butyl tape is wrapped around the mounting studs.

(2) Place glass into opening and insert mounting studs through holes in pinchweld.

(3) Install nuts attaching quarter window glass to pinchweld. Tighten nuts to 4.5 N*m (40 in. lbs.) torque.

(4) Install interior trim.

    More about «Removal and installation»:

    Windshield

    Rear door stationary glass

    Quarter window glass

    Liftgate backlite

    Dodge Durango Service Manual / Body / Stationary glass / Removal and installation / Quarter window glass

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.003