Toyota
Dodge Durango
 Service Manual
Power Mirror Systems » Exterior mirrors » Removal and installation
Power mirror switch

(1) Disconnect and isolate the battery negative cable.

(2) Pull the power mirror switch control knob rearward to remove it from the switch stem (Fig. 4).

(3) Remove the nut that secures the power mirror switch to the driver side door trim panel (Fig. 5).

Fig. 4 Power Mirror Switch Control Knob Remove/ Install - Typical Fig. 4 Power Mirror Switch Control Knob Remove/ Install - Typical

1 - SWITCH CONTROL KNOB

2 - DOOR TRIM PANEL

3 - POWER MIRROR SWITCH

Fig. 5 Power Mirror Switch Nut - Typical Fig. 5 Power Mirror Switch Nut - Typical

1 - SWITCH RETAINING NUT

2 - DOOR TRIM PANEL

3 - POWER MIRROR SWITCH

(4) Remove the trim panel from the inside of the driver side front door. Refer to Group 23 - Body for the procedures.

(5) Pull the trim panel away from the inner door panel far enough to access the power mirror switch wire harness connector.

(6) Unplug the power mirror switch wire harness connector (Fig. 6).

Fig. 6 Door Trim Panel Wire Harness Connectors Fig. 6 Door Trim Panel Wire Harness Connectors

1 - POWER MIRROR SWITCH

2 - TWEETER

3 - POWER WINDOW SWITCH

4 - WIRE HARNESS CONNECTOR

(7) Remove the power mirror switch from the back of the door trim panel.

(8) Reverse the removal procedures to install.

    More about «Removal and installation»:

    Power mirror switch

    Power mirror

    Dodge Durango Service Manual / Power Mirror Systems / Exterior mirrors / Removal and installation / Power mirror switch

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0047