Dodge Durango Service ManualEngine » Cleaning and inspection
Piston and connecting rod
Dodge Durango
Service Manual
Piston and connecting rod
CLEANING
CAUTION: DO NOT use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly coating, this coating must not be damaged.
(1) Using a suitable cleaning solvent clean the pistons in warm water and towel dry.
(2) Use a wood or plastic scraper to clean the ring land grooves.
CAUTION: DO NOT remove the piston pin from the piston and connecting rod assembly.
INSPECTION
Check the crankshaft connecting rod journal for excessive wear, taper and scoring.
Check the pistons for taper and elliptical shape before they are fitted into the cylinder bore.
Replace any piston and connecting rod not meeting the specifications.
More about «Cleaning and inspection»:
Intake manifold
Exhaust manifold
Cylinder heads
Piston and connecting rod
Oil pan
Oil pump
Cylinder block
Dodge Durango Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
© 2017-2024 Copyright www.dodurango.net
0.0061
0.0061