Toyota
Dodge Durango
 Service Manual
Overhead Console Systems » Removal and installation
Paperclip

REMOVAL

(1) Disconnect and isolate the battery negative cable.

(2) Remove the overhead console from the headliner.

Refer to Overhead Console in the Removal and Installation section of this group for the procedures.

(3) Remove the four screws that secure the paperclip to the overhead console housing.

(4) Pull the paperclip away from the overhead console far enough to access the wire harness connectors.

(5) Disengage the overhead console wire harness connector from the mount on the paperclip by pushing the connector firmly toward the left side of the overhead console housing.

(6) Remove the paperclip from the overhead console housing.

INSTALLATION

(1) Position the paperclip onto the overhead console housing.

(2) Engage the overhead console wire harness connector onto the mount on the paperclip by aligning the channels on the connector with the tab on the mount and pushing the connector firmly toward the right side of the overhead console housing.

(3) Install and tighten the four screws that secure the paperclip to the overhead console housing.

Tighten the screws to 2.2 N*m (20 in. lbs.).

(4) Install the overhead console onto the headliner.

Refer to Overhead Console in the Removal and Installation section of this group for the procedures.

(5) Reconnect the battery negative cable.

    More about «Removal and installation»:

    Overhead console reading and courtesy lamp lens

    Overhead console

    Paperclip

    Compass mini-trip computer

    Overhead console reading and courtesy lamp housing

    Sunglasses storage bin

    Garage door opener storage bin door

    Ambient temperature sensor

    Dodge Durango Service Manual / Overhead Console Systems / Removal and installation / Paperclip

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0205