Toyota
Dodge Durango
 Service Manual
Fuel System » Fuel injection system » Removal and installation
Intake manifold air temperature sensor-3.9/5.2/5.9L engines

The intake manifold air temperature sensor is located in the front/side of the intake manifold (Fig.

36).

REMOVAL

1) Remove air duct at throttle body.

(2) Disconnect electrical connector at sensor (Fig.

36).

(3) Remove sensor from intake manifold.

Fig. 36 Intake Manifold Air Temperature Sensor- 3.9/5.2/5.9L Engines-Typical Fig. 36 Intake Manifold Air Temperature Sensor- 3.9/5.2/5.9L Engines-Typical

1 - INTAKE MANIFOLD AIR TEMPERATURE SENSOR

2 - ELECTRICAL CONNECTOR

INSTALLATION

(1) Install sensor to intake manifold. Tighten to 28 N*m (20 ft. lbs.) torque.

(2) Install electrical connector.

(3) Install air duct at throttle body.

    More about «Removal and installation»:

    Automatic shutdown (asd) relay

    Fuel pump relay

    Oxygen sensor heater relays

    Throttle body-3.9/5.2/5.9L engines

    Throttle body-4.7L v-8 engine

    Throttle position sensor (tps)-3.9/ 5.2/5.9L engines

    Throttle position sensor (tps)-4.7L v-8 engine

    Idle air control (iac) motor-3.9/5.2/ 5.9L engines

    Idle air control (iac) motor-4.7L v-8 engine

    Manifold absolute pressure (map) sensor-3.9/5.2/5.9L engines

    Manifold absolute pressure (map) sensor-4.7L v-8 engine

    Powertrain control module (pcm)

    Oxygen sensor

    Air cleaner element (filter)

    Engine coolant temperature sensor-3.9/5.2/5.9L engines

    Engine coolant temperature sensor-4.7L v-8 engine

    Intake manifold air temperature sensor-3.9/5.2/5.9L engines

    Intake manifold air temperature sensor-4.7L v-8 engine

    Power steering pressure switch

    Dodge Durango Service Manual / Fuel System / Fuel injection system / Removal and installation / Intake manifold air temperature sensor-3.9/5.2/5.9L engines

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0025