Toyota
Dodge Durango
 Service Manual
Instrument Panel Systems » Diagnosis and testing
Instrument cluster

If all of the gauges and/or indicator lamps are inoperative, perform the Preliminary Diagnosis. If an individual gauge or Chrysler Collision Detection (CCD) data bus message-controlled indicator lamp is inoperative, go directly to the Self-Diagnostic Test. If an individual hard wired indicator lamp is inoperative, refer to Instrument Cluster - Hard Wired Lamp Diagnosis in the Diagnosis and Testing section of this group for the procedures to diagnosis that lamp. For complete circuit diagrams, refer to Instrument Cluster in the Contents of Group 8W - Wiring Diagrams.

NOTE: Certain indicator lamps in this instrument cluster are programmable. This feature allows those indicator lamps to be activated or deactivated with a DRBIIIT scan tool through the instrument cluster electronic circuitry for compatibility with certain optional equipment. If the problem being diagnosed involves improper illumination of the cruise-on indicator lamp, the overdrive-off indicator lamp, the transmission oil temperature warning lamp, or the upshift indicator lamp, use a DRBIIIT scan tool to be certain that the instrument cluster has been programmed with the proper vehicle equipment option settings.

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO GROUP 8M - PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

More about «Diagnosis and testing»:

Instrument cluster

Instrument panel cigar lighter

Instrument panel power outlet

Dodge Durango Service Manual / Instrument Panel Systems / Diagnosis and testing / Instrument cluster

Dodge Durango Service Manual

Categories


© 2017-2019 Copyright www.dodurango.net
0.0049