Toyota
Dodge Durango
 Service Manual
Heating and Air Conditioning » Description and operation
Heater and air conditioner control

DESCRIPTION

The heater and A/C system use a combination of mechanical, electrical, and vacuum controls. These controls provide the vehicle operator with a number of setting options to help control the climate and comfort within the vehicle. Refer to the owner's manual in the vehicle glove box for more information on the features, use, and suggested operation of these controls.

OPERATION

The heater-A/C control panel is located to the right of the instrument cluster on the instrument panel.

The control panel contains a rotary-type temperature control knob, a rotary-type mode control switch knob, and a rotary-type blower motor speed switch knob.

The heater-A/C control panel cannot be repaired. If faulty or damaged, the entire unit must be replaced.

The illumination lamps are available for service replacement.

    More about «Description and operation»:

    Blower motor

    Blower motor relay

    Blower motor resistor

    Blower motor switch

    Compressor

    Compressor clutch

    Compressor clutch relay

    Condenser

    Electronic cycling clutch switch

    Evaporator coil

    Expansion valve

    Filter-drier

    Heater and air conditioner

    Heater and air conditioner control

    Heater core

    High pressure cut-off switch

    High pressure relief valve

    Low pressure cut-off switch

    Rear overhead air conditioner

    Refrigerant

    Refrigerant lines

    Refrigerant line couplers

    Refrigerant oil

    Refrigerant system service ports

    Vacuum check valve

    Vacuum reservoir

    Dodge Durango Service Manual / Heating and Air Conditioning / Description and operation / Heater and air conditioner control

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0026