Toyota
Dodge Durango
 Service Manual
Transmission and Transfer Case » Diagnosis and testing
Gearshift cable

(1) The shifter lever and gate positions should be in alignment with all transmission PARK, NEUTRAL, and gear detent positions.

(2) Engine starts must be possible with shift lever in PARK or NEUTRAL gate positions only. Engine starts must not be possible in any other gear position.

(3) With shift lever handle in:

(a) PARK position-Apply forward force on center of lever and remove pressure. Engine starts must be possible.

(b) PARK position-Apply rearward force on center of lever and remove pressure. Engine starts must be possible.

(c) NEUTRAL position-Normal position. Engine starts must be possible.

(d) NEUTRAL position-Engine running and brakes applied, apply forward force on center of shift lever. Transmission shall not be able to shift from neutral to reverse.

    More about «Diagnosis and testing»:

    Automatic transmission diagnosis

    Effects of incorrect fluid level

    Causes of burnt fluid

    Fluid contamination

    Preliminary diagnosis

    Park/neutral position switch

    Overdrive electrical controls

    Gearshift cable

    Road testing

    Analyzing road test

    Hydraulic pressure test

    Air testing transmission clutch and band operation

    Converter housing fluid leak diagnosis

    Diagnosis tables and charts-re transmission

    Dodge Durango Service Manual / Transmission and Transfer Case / Diagnosis and testing / Gearshift cable

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0049