Toyota
Dodge Durango
 Service Manual
Fuel System » Fuel delivery system » Removal and installation
Fuel pump inlet filter

The fuel pump inlet filter (strainer) is located on the bottom of the fuel pump module (Fig. 26). The fuel pump module is located inside of fuel tank.

Fig. 26 Fuel Pump Inlet Filter Fig. 26 Fuel Pump Inlet Filter

1 - FUEL PUMP INLET FILTER

2 - LOCK TABS (2)

3 - FUEL PUMP MODULE (BOTTOM)

REMOVAL

(1) Remove fuel tank. Refer to Fuel Tank Removal/ Installation.

(2) Remove fuel pump module. Refer to Fuel Pump Module Removal/Installation.

(3) Remove filter by carefully prying 2 lock tabs at bottom of module with 2 screwdrivers. Filter is snapped to module.

(4) Clean bottom of pump module.

INSTALLATION

(1) Snap new filter to bottom of module. Be sure o-ring is in correct position.

(2) Install fuel pump module. Refer to Fuel Pump Module Removal/Installation.

(3) Install fuel tank. Refer to Fuel Tank Removal/ Installation.

    More about «Removal and installation»:

    Fuel filter/fuel pressure regulator

    Fuel pump module

    Fuel pump inlet filter

    Fuel gauge sending unit

    Fuel injector rail-3.9/5.2/5.9L engines

    Fuel injector rail-4.7L v-8 engine

    Fuel injector(s)

    Fuel tank

    Fuel tank filler tube cap

    Accelerator pedal

    Throttle cable

    Throttle cable-4.7L v-8 engine

    Dodge Durango Service Manual / Fuel System / Fuel delivery system / Removal and installation / Fuel pump inlet filter

    Dodge Durango Service Manual

    Categories


    © 2017-2024 Copyright www.dodurango.net
    0.0219