REMOVAL
(1) Remove A-pillar trim.
(2) Remove lower cowl trim.
(3) Remove door sill trim.
(4) Loosen upper and lower B-pillar trim to access weatherstrip.
(5) Pull weatherstrip from pinch flange around door opening (Fig. 41).
Fig. 41 Door Opening Weatherstrip
1 - UPPER BODY SEAL
2 - PRIMARY DOOR SEAL
INSTALLATION
(1) Clean pinch flange (2) Position the weatherstrip on the pinch flange around door opening and press into place.
(3) Press B-pillar trim into place.
(4) Install lower cowl trim.
(5) Install door sill trim. Ensure the clips attaching the sill trim to the door sill are fully seated.
(6) Install A-pillar trim.