Toyota
Dodge Durango
 Service Manual
Power Lock Systems » Description and operation
Driver unlock relay

The driver unlock relay is a International Standards Organization (ISO) micro-relay. The terminal designations and functions are the same as a conventional ISO relay. However, the micro-relay terminal orientation (or footprint) is different, current capacity is lower, and the relay case dimensions are smaller than those of the conventional ISO relay.

The driver unlock relay is a electromechanical device that switches battery current to the left front door power lock motor when the Remote Keyless Entry (RKE) receiver within the high-line Central Timer Module (CTM) grounds the relay coil. See Driver Unlock Relay in the Diagnosis and Testing section of this group for more information.

The driver unlock relay is located in the relay and fuse block attached to the back of the junction block, under the left side of the instrument panel in the passenger compartment. The driver unlock relay cannot be repaired and, if faulty or damaged, it must be replaced.

    More about «Description and operation»:

    Central timer module

    Power lock switch

    Power lock motor

    Remote keyless entry transmitter

    Remote keyless entry receiver

    Driver unlock relay

    Headlamp relay

    Horn relay

    Dodge Durango Service Manual / Power Lock Systems / Description and operation / Driver unlock relay

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0038