Toyota
Dodge Durango
 Service Manual
Chime/Buzzer Warning Systems » Description and operation
Driver seat belt switch

The driver seat belt switch is integral to the driver seat belt retractor assembly. The driver seat belt switch is normally closed, providing a ground signal to the instrument cluster when the ignition switch is in the on or start positions.

The seat belt switch monitors the amount of seat belt webbing wound onto the seat belt retractor spool. When the seat belt tip-half webbing is pulled out of the retractor far enough to engage the seat belt buckle-half, the switch opens the seat belt switch sense circuit.

The driver seat belt switch cannot be repaired and, if faulty or damaged, the entire driver seat belt and retractor unit must be replaced. Refer to Group 23 - Body for the service procedures.

    More about «Description and operation»:

    Central timer module

    Instrument cluster

    Driver door ajar switch

    Key-in ignition switch

    Headlamp switch

    Driver seat belt switch

    Dodge Durango Service Manual / Chime/Buzzer Warning Systems / Description and operation / Driver seat belt switch

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0026