Toyota
Dodge Durango
 Service Manual
Vehicle Theft/Security Systems » Removal and installation
Door lock cylinder switch

(1) Disconnect and isolate the battery negative cable.

(2) Remove the door outside latch handle mounting hardware and linkage from the inside of the door.

Refer to Group 23 - Body for the procedures.

(3) From the outside of the door, pull the door outside latch handle out far enough to access the door lock cylinder switch (Fig. 2).

(4) Disengage the door lock cylinder switch from the back of the lock cylinder.

(5) Unplug the door lock cylinder switch wire harness connector.

(6) Disengage the retainers that secure the door lock cylinder switch wire harness to the inner door panel.

(7) Remove the door lock cylinder switch from the door.

(8) Reverse the removal procedures to install.

    More about «Removal and installation»:

    Door ajar switch

    Door lock cylinder switch

    Liftgate lock cylinder switch

    Headlamp relay

    Horn relay

    Dodge Durango Service Manual / Vehicle Theft/Security Systems / Removal and installation / Door lock cylinder switch

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0027