Toyota
Dodge Durango
 Service Manual
Differential and Driveline » 8 1/4 And 9 1/4 axle » Removal and installation
Differential side bearings

REMOVAL

(1) Remove differential case from axle housing.

(2) Remove the bearings from the differential case with Puller/Press C-293-PA and:

  • Adapters C-293-48 and Plug SP-3289 for the 8 1/4 axle (Fig. 22).
  • Adapters C-293-47 and Plug C-293-3 for the 9 1/4 axle (Fig. 23).

Fig. 22 Differential Bearing Removal-8 1/4 Axle Fig. 22 Differential Bearing Removal-8 1/4 Axle

1 - SPECIAL TOOL C-293-PA

2 - SPECIAL TOOL C-293-48

3 - BEARING

4 - DIFFERENTIAL

5 - SPECIAL TOOL SP-3289

Fig. 23 Differential Bearing Removal-9 1/4 Axle Fig. 23 Differential Bearing Removal-9 1/4 Axle

1 - SPECIAL TOOL C-293-PA

2 - SPECIAL TOOL C-293-47

3 - BEARING

4 - DIFFERENTIAL

5 - SPECIAL TOOL C-293-3

INSTALLATION

(1) Install differential side bearings. Use:

  • Installer C-4340 with handle C-4171 for the 8 1/4 axle (Fig. 24).
  • Installer C-4213 and Handle C-4171 for the 9 1/4 axle.

(2) Install differential case in axle housing.

    More about «Removal and installation»:

    Rear axle

    Axle shaft

    8 1/4 And 9 1/4 axle seal and bearing

    Pinion seal

    Differential

    Differential side bearings

    Ring gear and exciter ring

    Pinion gear

    Final assembly

    Dodge Durango Service Manual / Differential and Driveline / 8 1/4 And 9 1/4 axle / Removal and installation / Differential side bearings

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.005