Toyota
Dodge Durango
 Service Manual
Differential and Driveline » Propeller shafts » Adjustments
Center bearing adjustment

Drive away shudder is a vibration that occurs at first acceleration from a stop. Shudder vibration usually peaks at the engines highest torque output.

Shudder is a symptom associated with vehicles using a two-piece propeller shaft. To decrease shudder, lower the center bearing in 1/8 inch increments. Use shim stock or fabricated plates. Plate stock must be used to maintain compression of the rubber insulator around the bearing. Do not use washers. Replace the original bolts with the appropriate increased length bolts.

    More about «Adjustments»:

    Rear axle pinion input angle

    Center bearing adjustment

    Dodge Durango Service Manual / Differential and Driveline / Propeller shafts / Adjustments / Center bearing adjustment

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0046