NOTE: CLOTH TRIM IS BONDED TO THE CUSHION FOAM.
REMOVAL
(1) Position seat in full forward position.
(2) Disengage J-strap at base of seat back.
(3) Using a trim stick, carefully pry off lumbar handle (driver's side only).
(4) Disengage wire hanger securing back pad to frame.
(5) Separate cover/cushion from seat back frame.
INSTALLATION
(1) Position cover/cushion on seat back frame.
(2) Engage wire hanger.
(3) Engage J-straps at base of seat back.
(4) Position lumbar handle on lumbar adjuster and press into place.
(5) Return seat to normal position.