Toyota
Dodge Durango
 Service Manual
Fuel System » Fuel injection system » Description and operation
Brake switch-pcm input

OPERATION

When the brake light switch is activated, the Powertrain Control Module (PCM) receives an input indicating that the brakes are being applied. After receiving this input, the PCM maintains idle speed to a scheduled rpm through control of the Idle Air Control (IAC) motor. The brake switch input is also used to disable vent and vacuum solenoid output signals to the speed control servo.

    More about «Description and operation»:

    Powertrain control module (pcm)

    Modes of operation

    Automatic shutdown (asd) relay sense-pcm input

    Battery voltage-pcm input

    Brake switch-pcm input

    Engine coolant temperature sensor-pcm input

    Five volt sensor supplies-primary and secondary

    Ignition circuit sense-pcm input

    Intake manifold air temperature sensor-pcm input

    Manifold absolute pressure (map) sensor-pcm input

    Oil pressure sensor-pcm input

    Oxygen sensor (o2s)-pcm input

    Power grounds

    Power steering pressure switch- pcm input

    Sensor return-pcm input

    Throttle position sensor (tps)-pcm input

    Vehicle speed and distance-pcm input

    Auto shutdown (asd) relay-pcm output

    Ccd bus (+/-) circuits-pcm outputs

    Data link connector-pcm input and output

    Fuel injectors-pcm output

    Fuel pump relay-pcm output

    Idle air control (iac) motor-pcm output

    Oxygen sensor heater relays-pcm output

    Radiator cooling fan relay-pcm output

    Throttle body

    Dodge Durango Service Manual / Fuel System / Fuel injection system / Description and operation / Brake switch-pcm input

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0051