Toyota
Dodge Durango
 Owners Manual
Starting and operating » Stop/start system - if equipped
Automatic Mode

enabled after every The Stop/Start feature is enabled after every normal customer engine start. At that time, the system will go into STOP/START READY and if all other conditions are met, can go into a STOP/START AUTOSTOP ACTIVE "Autostop" mode.

To Activate The Autostop Mode, The Following Must Occur:

  •  The system must be in STOP/START READY state. A STOP/START READY message will be displayed in the Driver Information Display (DID) within the Stop/ Start section. Refer to "Driver Information Display (DID)" in "Understanding Your Instrument Panel" for further information.
  •  The vehicle must be completely stopped.
  •  The shifter must be in a forward gear and the brake pedal depressed.

The engine will shut down, the tachometer will move to the zero position and the Stop/Start telltale will illuminate indicating you are in Autostop. Customer settings will be maintained upon return to an engine running condition.

    More about «Stop/start system - if equipped»:

    Automatic Mode

    Possible Reasons The Engine Does Not Autostop

    To Start The Engine While In Autostop Mode

    To Manually Turn Off The Stop/Start System

    System Malfunction

    Dodge Durango Owners Manual / Starting and operating / Stop/start system - if equipped / Automatic Mode

    Dodge Durango Owners Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.003