CAUTION: Inspect the condition of the shoulder belt and lap belt. Replace any belt that is cut, frayed, torn, or damaged in any way. Also, replace the shoulder belt if the retractor is either damaged or inoperative.
REMOVAL
(1) Partially remove quarter panel trim to access fasteners.
(2) Remove bolt attaching seat belt anchor to floor panel.
(3) Remove bolt attaching retractor to C-pillar (Fig. 90).
(4) Separate retractor from vehicle.
INSTALLATION
(1) Position retractor in vehicle.
(2) Install bolt attaching retractor to C-pillar (Fig.
90). Tighten bolt to 39N*m (29 ft. lbs.) torque.
(3) Install bolt attaching seat belt anchor to floor panel. Tighten bolt to 39 N*m (29 ft. lbs.) torque.
(4) Install quarter panel trim.