Toyota
Dodge Durango
 Service Manual
Body » Seats » Removal and installation
2Nd row seat back cover

NOTE: CLOTH TRIM IS BONDED TO SEAT FOAM

REMOVAL

(1) Tumble seat forward.

(2) Disengage J-strap at seat back base.

(3) Disengage inboard and outboard J-straps on seat back.

(4) Return seat to seating position.

NOTE: When removing the head restraint sleeves and guides, the retaining tabs on the sleeves and guides will be damaged. Check the availability of replacement parts before servicing.

(5) Remove head restraint, head restraint sleeves, and head restraint guides. Discard sleeves and guides.

(6) Roll cover upward and remove from seat back.

INSTALLATION

(1) Position cover on seat back.

(2) Roll cover downward over seat back.

(3) Install new head restraint sleeves and guides.

Install head restraint.

(4) Tumble seat forward.

(5) Engage inboard and outboard J-straps on seat back.

(6) Engage J-strap at seat back base.

(7) Return seat to seating position.

    More about «Removal and installation»:

    Side shield

    Towel bar

    Bucket seat track

    Bucket seat back cover/cushion

    Bucket seat cushion/cover

    Center seat/console

    Center armrest/console inertia latch cover

    Center seat cushion/cover

    2Nd row seat back

    2Nd row seat back cover

    2Nd row seat cushion cover

    2Nd row seat cushion

    2Nd row seat latches

    2Nd row center seat cushion cover

    2Nd row center seat cushion

    2Nd row center seat back

    2Nd row center seat back cover

    3Rd row seat cushion cover

    3Rd row seat cushion frame

    Head restraint sleeve

    3Rd row seat back

    3Rd row seat back cover

    Dodge Durango Service Manual / Body / Seats / Removal and installation / 2Nd row seat back cover

    Dodge Durango Service Manual

    Categories


    © 2017-2019 Copyright www.dodurango.net
    0.0051