REMOVAL
(1) Tumble outboard seats forward.
(2) Remove screw attaching cover to hinge.
(3) Using a trim stick, pry trim covers from center seat back to center seat cushion hinge (Fig. 13).
(4) Remove bolts attaching center seat back to seat cushion (Fig. 14).
(5) Separate center seat back from seat cushion.
Fig. 13 2nd Row Center Seat Back Hinge Cover
1 - 2ND ROW CENTER SEAT BACK
2 - SEAT CUSHION
3 - HINGE COVER
4 - TRIM STICK
INSTALLATION
(1) Position center seat back on seat cushion.
(2) Install bolts attaching center seat back to seat cushion (Fig. 14). Tighten bolt located in round hole first than bolt located in slotted hole. Tighten bolts to 27 N*m (19 ft. lbs.) torque.
(3) Install covers on center seat back to seat cushion hinge.
(4) Install screw attaching cover to hinge.
(5) Return outboard seats to seating position.